home| online dealer stores| applications| RV Cat | Marine Cat | ATV Cat | CYCLE Cat | SNOW Cat
STEPS AND TIE DOWNS - STEPS - MANUAL STEPS
(Select from these Groups)
Click pictures to see enlarged view!
4000 SERIES ALUMINUM CAMPER STEPS By BILLIS R.V.E.
Our 4000 series steps are light duty steps designed for use on non-basement model truck campers. Each step is manufactured from aircraft quality aluminum components. The bolt together construction permits the owner to keep the step tight allowing for ease of repair in the event of damage. Our step features a locking system which prevents the step from being dislodged when in use. Each step tread has a permanent, built-in non-skid surface feature which makes the step safer to use in wet weather. All necessary mounting hardware is included in the carton

18" WIDE ALUMINUM SCISSOR STEPS By BROPHY PROD
•Light weight steps manufactured from heavy gauge aluminum for maximum strength and durability. •Comes fully assembled and easy to use. •Universal mounting applications. •Self-adjusting to the terrain and fold for easy storage. •Mounting bracket included •Step size 6" x 18"•Made in America

RECEIVER HITCH STAIR By BROPHY PROD
•Strong & convenient •Economical stair for camper entry •Three adjustable lengths: 1/2", 3-1/2" & 6-1/2" (back of top step to hitch pin holes) •No assembly required •Easily slides into any 2" receiver and securely locks into place with any 5/8" standard hitch pin (not included) •Powder coated black finish•Made in America

QUADRA-STEP By ELKHART TOOL & DIE
This four-step entry step solves the problem of higher RVs. One fluid motion will easily pull and extend the steps. Features perforated tread with anti-slip safety strips for added traction. Constructed of solid American steel and finished in a 16-step electronic coating. Self-storing step can be bolted to floor or welded to frame. 25" drop. Dimensions: 27" x 12-3/16" x 15-3/4".

SINGLE KLEEN STEP By ELKHART TOOL & DIE
Perforated hole surface gives ample scraping surface. Round front corners. 24-5/8" wide, 5-1/4" deep, 6-1/2" drop.

STANDARD SINGLE STEP By ELKHART TOOL & DIE
Steps can be bolted to floor or welded to frame. Comes with perforated tread with anti-slip safety strip for added traction. Finished in a durable black E-coat.

TRI-STEP KLEEN-FOLD By ELKHART TOOL & DIE
One motion to pull out and flip down. Neat appearance in closed position. Features solid anti-slip tread surface. Step is self-storing. Can be bolted to floor or welded to frame. Finished in black powder coat. Dimensions: 27" x 15" x 12". Total Drop: 18.5".

TWO STEP KLEEN-FOLD By ELKHART TOOL & DIE
Requires only 12: depth for installation. Can be bolted or welded on. Only 7" high when folded. Gives more road clearance. Notched side supports permit siding to be wrapped under to give your RV a smoother finished appearance. Easy open/close operation for RV owners.

UNDER BUMPER CAMPER STEP By ELKHART TOOL & DIE
Mounts under the bumper of campers. When open, the step has a 3" drop, when closed the step is only 2-3/4" below the bumper. 20-7/8" x 3-3/4". Black.

POSITRAC™ NON-SLIP RV ENTRY STEPS By HSM
The unique, non-slip diamond-groove design of PosiTrac™ radius entry steps stand up to rain, sleet, mud and ice. Each step is made from heavy gauge American steel with a tested powder coat finish. Unique pivotal action opens and closes easily for fingertip operation -- no sliding pinch points. Each step is 24” wide and equipped with a self-locking mechanism for travel. All built with the know-how of a world-class manufacturer that’s made more than 3 million steps for RV owners who won’t stand for second best.•Each step is 24” wide•Dent-resistant heavy gauge U.S. steel construction•Long-lasting powder coat finish•Easy pivotal action for fingertip control with no pinch points•Firm rigidity with double lock system•Solid self-locking mechanism for travel•Made in the USA

ALUMINUM PLATFORM STEP By STROMBERG CARLSON PR
•Platform size 19" x 14" x 3" or 8" multi heights •Supports 1,000 lbs. •Light weight aluminum will not rust •Rubber feet won't slip

PLASTIC PLATFORM STEP By STROMBERG CARLSON PR
Treads are a no rust composite with 4 steel stringers that can support 500 lbs. The open grated tread surface allows campers to shed dirt and sand prior to entering their RVs. The legs lock open and closed on a ball bearing and nylon bushings are provided for easy movement. The platform is 24" wide and 16" deep. With legs open, the step is 8.25" tall. With legs folded the step is 4.5" tall.

RAIL MATE By STROMBERG CARLSON PR
Manufactured for comfort and ease of use, the Rail Mate is removable, stores during travel and sets up in just minutes. To create this outstanding stability, a strong, steel bracket attaches to the side of your entry steps and Stromberg’s Rail Mate slides in, held in place by tension bolts. A drop down leg finishes off the stabilization by creating rigidity and grounding the Rail Mate for a solid helping hand. Designed for all triple and quad entry steps, Stromberg’s Rail Mate is sure to be your newest made in America camp companion. Weighing in at 25.5lbs the Rail Mate is lightweight and easy to install. Tools are required for proper installation. The bottom of the door frame to the top of the handle measures approximately 38”, depending on application. The rail will extend approximately 25” from the coach, depending on application

STEEL PLATFORM STEP By STROMBERG CARLSON PR
This Steel Platform step is stable in all directions. All legs deploy past the plane of the platform to keep you safe and sound traveling up and down our step. All steel construction with easy folding legs. Works at two heights 4" and 8". Non skid tape on platform surface keeps your foot planted where you put it. Platform measures 16"x24".

GLOW GUIDE By TORK LIFT INTERNATIONAL
Torklift International just took "glow power" to a whole new level by finally introducing a solution to R.V. step instability. Joining their revolutionary line up of glow in the dark scissor steps is the new "GlowGuide" handrail system. The GlowGuide handrail eliminates the balancing act on your steps by dramatically enhancing safety, stability, and durability. The unique multi-purpose design allows GlowGuide to transform in seconds to a broom or telescoping wash brush. With only 5 minutes of light, the GlowGuide provides up to 10 hours of "glow", safely lighting the path up and down your steps after dark. Glow Guide is made in the USA of 100% aircraft grade aluminum and high impact powder coated stainless steel for maximum durability. Its patented twist lock design allows easy height adjustability in all types of terrain. In keeping with Torklift's commitment to protect the environment, the GlowGuide is made 100% of recyclable material and packaged in recycled material. The GlowGuide does not take up RV storage space as it is designed to be stored in position outside the camper when not in use. Weighing only 5 lbs, GlowGuide is easy to handle and saves wear and tear not only on your rig but on your joints as well•Universal Guide Assist System•Stores to Deployment in Seconds•One System, Many Uses. All in one Compact Design•Each Arm Telescopes from 32" to 53"•Locks to your R.V.•Glows in the Dark for 10 hours with only 5 minutes of light exposure•Self Illuminating - No Batteries

THE GLOW STEP By TORK LIFT INTERNATIONAL
Torklift presents the most versatile and secure scissor step available. Self-illuminating entry/exit for your RV. Heavy Duty construction consists of 100% Aluminum & Stainless Steel. The Glow step features: •Self-illuminating Steps - No Batteries OR Wires •Glow in the dark for up to 10 hours with 5 minutes of light exposure •Sure Grip Extrusion (uses no grip tape) •100% Aluminum and Stainless Steel •Stainless bolted hinges allow for easy step addition and removal (Add-a-Step Kit #A7501) •Lifetime Warranty

THE GLOW STEP ACCESSORIES By TORK LIFT INTERNATIONAL