home| online dealer stores| applications| RV Cat | Marine Cat | ATV Cat | CYCLE Cat | SNOW Cat
STEPS AND TIE DOWNS - TIE DOWNS - PICKUP CAMPER TIE DOWNS
(Select from these Groups)
Click pictures to see enlarged view!
FRONT SPLIT MOUNT TIE DOWN SYSTEMS By BILLIS R.V.E.
•Front Split Mount Tie Down Systems are designed to fit specific makes and models of full size domestic vehicles. You will find that when the correct tie down has been chosen, installation time is usually no more than 15 or 20 minutes. Not for off road use.

REAR SPLIT MOUNT TIE DOWN SYSTEMS By BILLIS R.V.E.
•Rear Split Mount Tie Down Systems. As with the front split mount tie down, the rear split mount has specific vehicle applications. Some fit vehicles where no hitch has been installed. Others fit vehicles where there has been a factory or an aftermarket hitch installed. Whatever the application, you can be sure that your tie down will fit and that it will do the job for which it is designed. Not for off road use.

ANGLED CAMPER HOLD DOWN By BROPHY PROD
This new angled design allows more clearance between your hold down and outside truck fender.•Easier to attach hardware•Extra wide clamp for exceptional holding strength•No drilling required•Made in America

CAMPER HOLD DOWN •SUPER HEAVY-DUTY By BROPHY PROD
•Wider design fits the newest full size pickups •No drilling required •Quick, easy and secure installation, simply tighten two bolts •No projections into wheel well •Extra wide clamp for exceptional holding strength •Made of heavy 3/8" x 3" steel•Made in America

CAMPER TIE DOWN •STAKE POCKET By BROPHY PROD
•Designed for full-size pickups •Three removable spacer tabs allow custom fit for most pickups •Mounts permanently in stake tube for a tie down that is smart in appearance and always ready to use •Tab lock anchors tie down to truck rail to prevent lifting and twisting •For campers up to 8' •Made in America

TIE DOWN HARWARE PACKAGE By AURORA PRODUCTS
•Hardware includes: four 3/8" turnbuckles, four “S” hooks and four chains.• 3,000 lb. max. capacity per set•Made in America

HAPPIJAC CAMPER ANCHOR TIEDOWNS By HAPPI JAC CO
Happijac continues to offer their time tested Camper Anchor tiedowns. The scientific design of Happijac Camper Anchor tiedowns gives maximum strength while eliminating leverage and stress forces on the truck. Removable rear tiedown coupler rotates to direction of pull, eliminating undesirable torque. Happijac Camper Anchor tiedowns won't bend, twist or fail. •NOTE: Camper Anchor tiedowns do not mount to the frame as do the Happijac Frame Mount tiedowns. Camper Anchor tiedowns are not for use on full-size extended cab, crew cab, 4x4, diesel trucks or with campers over 2500 lbs. These applications require the Happijac Frame mount tiedowns (FT kit).

HAPPIJAC DIRECT-TO-FRAME TIEDOWN SYSTEMS By HAPPI JAC CO
After extensive research Happijac Company has perfected an innovative Frame Mount Tiedown System that is three times stronger than other tiedowns and controls all aspects of securing a camper to a truck. While other tiedowns may "hold your camper down" only Happijac tiedowns prevent camper movement in all directions (forward-backward, up-down, left-right, yaw, pitch and roll). The Happijac Frame Mount System combines the proven design of Happijac Camper Anchor tiedowns with Happijac's patented Direct-to-Frame mount, providing the customer with unsurpassed strength, handling, and ease of use while also featuring quick and simple installation. The complete Happijac Frame Mount Tiedown System consists of three components (MUST ORDER ALL 3 COMPONENTS FOR COMPLETE SET): •(A) FT tiedown kit with centering guide locks (FT-UT9, FT-CG9, FT-CG07, FT-CG07S or FT-DR2). •(B) Turnbuckles (FM-QLTB or FM-TB) •(C) Stabilizing Bar (USB-010 or SB -020)

TORKLIFT ANCHOR GUARDS By TORK LIFT INTERNATIONAL
AnchorGuard turnbuckles have a high grade chrome and zinc plating. These are easy to set up with the spring tension indicators and each turnbuckle is labeled to it's easy to figure out which one goes where. Includes a lifetime spring warranty. Kit includes 2 front spring loaded and 2 rear cushioned turnbuckles.

TORKLIFT DERRINGER ANCHOR GUARDS By TORK LIFT INTERNATIONAL
Incorporates the Derringer quick disconnect handle and the Anchor Guard turnbuckles into one convenient kit. Kit includes: 4 Polished stainless Derringer quick disconnect handles, 4 stainless steel anchor guard turnbuckles - front two are spring loaded, rear two are cushioned.

TORKLIFT FASTGUN LEVER-ACTION SPRING-LOADED TURNBUCKLES By TORK LIFT INTERNATIONAL
The world's only lever action turnbuckles that are 100% tool free, and 100% lockable. Each precision made piece comes spring loaded, includes spring tension indicators and has a legendary lifetime guarantee.

TORKLIFT FASTGUN LOCKS By TORK LIFT INTERNATIONAL
Keep your turnbuckles safe from theft and tampering with FastGun Locks. They work with all of the FastGun series including the Derringers. •Keyed alike for your convenience. •Locks come with weather caps to prevent weather damage and road grime from entering the lock assembly. •They feature a snap lock design for a quick and easy lock and unlock. •Locks have automotive quality plating.

TORKLIFT SPRING LOAD UNITS By TORK LIFT INTERNATIONAL
Add to any tie down kit to make it spring loaded.

TORKLIFT TIE DOWN FINISHING KIT By TORK LIFT INTERNATIONAL
Protect your investment with Torklift International’s new Vinyl Cap Kit for tie downs. Simply remove the tie down insert, replace it with our special protective foam and cap it off with our exclusive vinyl beauty caps. This cost effective measure allows you to minimize the harsh effects of the environment your rig works in. Kit includes: 4 vinyl caps, 4 expanded styrofoam plugs

TORKLIFT TRUE FRAME MOUNTED CAMPER TIEDOWNS By TORK LIFT INTERNATIONAL
Leading the industry in strength, quality, advanced design and installation, TorkLift TRUE Frame Mounted Tie downs are the best choice for securing your truck camper. Torklift’s unique patented design incorporates four independent tie down points that bolt directly to the trucks heavy-duty frame dramatically improving stability and handling (no belly or cross bars). TorkLift tie downs are engineered to fit tight and secure to your trucks frame with no compromise in ground clearance. Most applications are no drill making installation quick and easy.•Proudly Made in the USA•Lifetime Warranty•Removable inserts•Virtually invisible when not in use•Eliminates Bed/Bumper Damage•Improves Camper Stability & Handling•No Loss of Ground Clearance•No Drilling on Most Applications