ELECTRICAL - BATTERIES AND ACCESSORIES - BATTERY SWITCHES
(Select from these Groups)
Click pictures to see enlarged view!
701 CONTOUR BATTERY MASTER SWITCH By MARINCO ELECTRICAL GROUP
The 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the ON or OFF position, however, can be removed by switching to an anti-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications. The 701 also features removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. The 701 can be either surface or recess mounted. •Continuous Rating: 275 Amps DC •Intermittent Rating: 455 Amps DC •Cranking Rating: 1250 Amps DC •Voltage Rating: 48 Volts DC •Operation: On/Off •Mounting: Recessed or Surface •Ignition protected •Termination Stud Size: 2 x 10 mm (3/8 inch) •Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches) •Tin plated copper studs and nuts
701-S MINI SELECTOR BATTERY SWITCH By MARINCO ELECTRICAL GROUP
The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 701-S offers a simple economical way of separating two batteries.
720 HEAVY DUTY BATTERY SWITCH By MARINCO ELECTRICAL GROUP
The 720 Heavy Duty Battery Switch follows the successful release of the 701 switch in 1999. It ?ts into the same contour lock system as used on the battery distribution system. Rated at 600 amps continuous and 2500 amps cranking. It is well suited to larger vessels. As with the 701, the 720 can be recessed or surface mounted. The 720 uses the same style of self cleaning sliding contact as used in the 701 and utilizes the same label sheet as 701 (part number 713 or 715) •Continuous Rating: 600 Amps DC •Intermittent Rating: 800 Amps DC •Cranking Rating: 2500 Amps DC •Voltage Rating: 48 Volts DC •Operation: On / Off •Mounting: Recessed or Surface •Termination Stud Size: 2 x 12 mm (1/2 inch) •Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches) •Tin plated copper studs and nuts •Ignition protected •Termination Stud Size: 2 x 12 mm (1/2 inch)
721 HEAVY DUTY SELECTOR SWITCH By MARINCO ELECTRICAL GROUP
The 721 Battery Selector Switch is our heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover. While BEP Marine recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries.
DC HIGH PERFORMANCE BATTERY SWITCHES By BLUE SEA SYSTEMS
•350 Amperes continuous rating for small inboard gasoline or diesel engines. •Ignition protected - Safe for installation aboard gasoline powered boats. •Fits all Perko and Guest low amperage battery switch hole patterns. •Luminous label for low light reading. •Case design allows surface or rear panel mounting. •Voltage Rating: 48 VDC maximum •Accepts up to 4/0 battery cables
DC MINI BATTERY SWITCHES By BLUE SEA SYSTEMS
•300 Amperes continuous rating for outboards and small inboard gasoline engines •Ignition protected - Safe for installation aboard gasoline powered boats •Case design allows surface, front panel, or rear panel mounting •Tactile textures indicate knob position by feel only •Icon label set included for circuit identification •Molded in durable reinforced polycarbonate •Accepts up to 4/0 battery cables •48 Volts DC maximum voltage rating
BATTERY CUT OFF SWITCH W/ KEY By BOATERS SPORTS, INC
Don't drain your battery, cut it off completely! Removable key acts as theft deterrent. Weather resistant rubber cap. 100 Amp @ 12V continuous. 1/4" dia. Mounting bolts.
BATTERY SWITCHES By BOATERS SPORTS, INC
Molded Case - High Impact. Ignition protected. Will replace competitive switches without modification. 3/8" cable lugs. Only 2.75" deep x 5.2" radius.
UNIVERSAL MOUNT SWITCHES By MARINCO ELECTRICAL GROUP
Upgrade to Guest quality with ease! These switches install in the same cutout and hole patterns as competitive models and feature high-impact, molded cases that are impervious to petroleum-based liquids for long, reliable life.
ANTI-THEFT BATTERY SAVERS By M & L MARINE INC.
Brass Battery Switch with removable knob, keeps batteries from running down and thieves from driving off!!! •AMP RATING: 100 CONTINUOUS / 600 CRANKING •DISCONNECT RECOMMENDED BY OUTBOARD MOTOR MANUFACTURES USING ELECTRONIC FUEL INJECTION
ANTI-THEFT BATTERY SAVERS By M & L MARINE INC.
Brass Battery Switch with removable knob, keeps batteries from running down and thieves from driving off!!! •AMP RATING: 100 CONTINUOUS / 600 CRANKING •DISCONNECT RECOMMENDED BY OUTBOARD MOTOR MANUFACTURES USING ELECTRONIC FUEL INJECTION
BATTERY DISCONNECT SWITCH WITH KEY By MOELLER MFG CO INC
•Conveniently places on/off switch on bulkhead •110 amp continuously at 12V / 500 amp at 12V for 10 seconds •Key & cover have environment-proof boot to reduce corrosion •Prevents battery discharge and unauthorized use
MARINE BATTERY MAIN SWITCH By THE NOCO COMPANY
Marine Battery Main Switch completely cuts off power to batteries by a turn of the key to protect against unwanted battery drain, electrical fires and unauthorized use. For use in 6 to 24 VDC systems. Features: •Durable polycarbonate case •Heavy-duty copper contacts •210A continuous, 600A intermittent •Resistant to corrosion
8500 SERIES BATTERY SELECTOR SWITCHES By PERKO
Ignition protected. For use with systems under 50 volts. 250 Amps continuous, 360 Amps intermittent capacity. For use with two or more batteries and single or dual engine systems. (Two switches required for dual engine systems). Permits selection between batteries for starting and charging or operation of both batteries in parallel. Allows for addition of an extra battery for accessories. Features a make-before-break design. In "OFF" position acts as an emergency disconnect. Surface mount, red plastic housing with large black plastic knob. Improved design protects copper contacts and brass terminals. •Size: 5-1/4" Dia., 2-5/8" depth. One per display card.
8503 ALTERNATOR FIELD DISCONNECT BATTERY SWITCH By PERKO
In addition to the standard features listed for the BATTERY SELECTOR SWITCHES, these models will prevent damage to the alternator if accidentally switched to the "OFF" position while the engine is running. 5-1/4" Dia., 2-5/8" depth. One per display card.
9601 MAIN BATTERY SWITCH By PERKO
These units are the same basic design and construction as the 8500 Series BATTERY SELECTOR SWITCHES except they are offered as main disconnect switches. For use with systems under 50 volts. 250 Amps continuous, 360 Amps intermittent capacity. 5-1/4" Dia., 2-5/8" depth. One per display card.