|
|
   |
VENT STIK
High RV ceiling vents are now within reach. Replace the existing handle on your manually operated vent with this special knob. Then use the Vent Stik to grasp the bail and turn. |
|
|
  |
LIGHTS OUT VENT SHADE
Prevent light from shining into RV sleeping quarters at night. Easily mounts to ceiling and retracts into the space-efficient housing to allow light inside during the day. Opens to 14-1/8" x 19". Durable, lightweight vinyl's reflective finish reflects heat to keep RV cool. |
|
|
 |
SUNSHIELD™ RV VENT COVER
Increase your RV's AC and heating efficiency. Sunshield's reflective surfaces block 100% of the sun's damaging rays, helping to keep your RV cooler in summer and warmer in winter. Reflective thermal barrier mounts securely with hook-and-loop strips. 17.5" x 17.5" |
|
|
 |
SUNSHIELD™ RV VENT INSULATOR
Sunshield™ RV Vent Insulator with a full 3" of foam. Fits snugly in vent opening to help stop heat transfer, keeping your RV cooler in summer and warmer in winter. Reflective surface blocks 100% of the sun's damaging rays. Fits standard 14" vents. |
|
|
 |
UNIVERSAL VENT INSTALLATION KIT
Replace or install roof vents, side mount vents, plumbing stacks and refrigerator vents. 3/4" x 8' kits come complete with screws and instructions. |
|
|
  |
THERMAL VENT PLUG
Compresses to fit all makes of roof vents. Adds 3" of insulation to keep light, heat and condensation out and cool air in. Measures 14" x 14". |
|
|
|
|
  |
110 VOLT FAN MOTORS
Used on range hoods, roof vents, ceiling fans, sidewall vents and attic ventilators |
|
|
 |
12 VOLT DC MOTOR KIT
This kit replaces VD0218 and older VA0164 and VC0468 12V motors used in Ventline's standard roof ventadomes and range hoods. Included in the kit is the VD0218 motor, motor lead wires, screws, instruction sheet and a drill template to retro fit the VD0218 motor to the brackets used with older motors. |
|
|
|
6" FAN BLADE
6" diameter, 6 blade, 1/8" round spline, .125 dia. shaft. CCW |
|
|
|
|
 |
6" POLYPROPYLENE FAN BLADE
Used on the following products: 1/8" (.125" dia.) shaft to 12V vent domes (older style). Fits 1/8" motor shaft with flat (D). CCW. |
|
|
 |
6-1/2" FAN BLADE
Used on the following products:V2062, V2263, V2044, V2244, V2045, V2245, V2015, V2215. Fits shaft .214 dia. CW |
|
|
|
|
 |
7" POLYPROPYLENE FAN BLADE
Used on the following products; PC, PH series range hoods (120v). Fits 1/8" shaft (.125" dia.) With Knurl. CCW. |
|
|
|
|
