|
|
   |
ANGLER‘S PAL ROD HOLDERS By MARINETECH PRODUCTS
•Designed and manufactured by Bystrom Bros., one of America's leading producers of state-of-the-art automated machine components. •For optimum fishing performance, Angler's Pal gives you a 360° full hemisphere of possible positions. •The mounting base on all Angler's Pal models can be easily removed from the unit with an "Allen Wrench" for storage. •The permanent mount and clamp mount are interchangeable. Can be permanently mounted to deck or boat. Screws included. •Precision made out of rust-resistant stainless steel/aluminum for fresh and saltwater fishing. |
|
|
  |
2-IN-1 RH-46 ROD HOLDER (NON-ADJUSTABLE) By ATTWOOD CORP
Especially designed for casting and spinning rods, the RH-46 assures that your rod is always in a positive position allowing single motion hook setting and rod removal. It means having your rod fingertip ready when a fish strikes. Side Mount included. |
|
|
 |
ATTWOOD HEAVY DUTY ROD HOLDER By ATTWOOD CORP
Features a new ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180o vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Bi-Axis mount. |
|
|
|
|
 |
BI-AXIS MOUNT By ATTWOOD CORP
The bi-axis rod holder mount combination allows for mounting in multiple configurations. This new design offers an improved fit with positive lock for secure rod holder mounting. Can be mounted on side or top of gunwale. Compatible with all Attwood and other leading rod holder mounting patterns. |
|
|
 |
NEW PRO SERIES ROD HOLDER By ATTWOOD CORP
The Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Bi-Axis mount. All the Pro-Series unique, patented features you've come to expect, with the ability to mount in multiple configurations. Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. Includes bi-axis mount. |
|
|
 |
PAIR 2-IN-1 ROD HOLDERS (NON-ADJUSTABLE) By ATTWOOD CORP
Each holder includes a gear lock side mount base. These are the only holders that lock and secure both casting and spinning rods. Rod holders feature a dual-position locking ring. The ring opens with a snap so the rod is finger-tip ready when the fish strikes. A single up-and-out motion removes the rod and sets the hook. Non-adjustable rod holder features fixed vertical angle to optimize rod positioning. Rod throat opening fits most standard and ultra-light rods up to 1-3/16" diameter. Locking ring fits spinning reel handle shanks up to 7/16" diameter. |
|
|
 |
RAIL MOUNT By ATTWOOD CORP
For use with Bi-Axis mount, Attwood standard side mounts, and other leading rod holder mounts. Complete with all necessary hardware to mount to rail. |
|
|
 |
ROD HOLDER EXTENSION By ATTWOOD CORP
Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6", allowing for faster access when that fish strikes. Made from super tough glass filled nylon. Works with Attwood post mount rod holders. |
|
|
  |
DELUXE ROD BUNK By INDIANA MARINE
The perfect solution for carrying rods in your SUV or truck. Features an automotive grade buckle with built-in adjuster and snap hook that makes attachment and adjustment easier than ever. Quick and easy installation holds rods securely out of the way while traveling. Holds up to 7 rod and reel combinations. |
|
|
 |
ROD BUCKLE® RETRACTABLE ROD HOLD DOWN-SYSTEM By INDIANA MARINE
The most innovative rod hold-down system available for deck style fishing boats. •The RodBuckle® features a self-storing, automatically retractable polyester strap which extends a full 24". •The PVC extrusion-coated polyester strap grips those valuable rods, and also resists hook penetration. •The RodBuckle® securely locks in a fastened position on the deck and can be easily operated with one hand. •This unit can be mounted in the deck, in the gunwale, or top deck (requires F11493H adapter. •Contains 1 flush mount rod hold-down, instructions, mounting template, and 5 stainless steel black coated screws. |
|
|
  |
ADJUSTABLE ROD HOLDERS By BOATERS SPORTS, INC
Tournament Adjustable Rod Holder pivots up and down and swivels 360 degrees. Locking system secures spinning. Bait cast and closed face rods and reels. Constructed of black heavy-duty ABS plastic with stainless steel hardware. Choose from 3 mounting types. Rail mount attaches to round or square rails up to 1" dia. Clam pack. |
|
|
|
|
|
|
 |
ROD HOLDER RACK By BOATERS SPORTS, INC
The Rod holder and storage feature is a great place to store your pliers and fillet knives. Made of high impact white plastic that resists chips and cracks and can be cleaned with soap and water. |
|
|
|
|
  |
CANNON ROD HOLDER By JOHNSON OUTDOOR
•Exclusive three-position rod-holding configuration provides the fastest baitcast or spinning rod pickup. •Rear cradle is slotted to securely store spinning reels. •Middle cradle shortens amount of rod extending through the back of the holder. •Front cradle shortens even more the amount of rod butt exposed and is slotted to fit a baitcast rod trigger allowing for lightning quick rod removal. •Front and rear cradles are slotted for spinning reel use. •Rod ring-locking device provides trouble free rod security. •Easy to use, spring loaded adjustment knob for simple one handed rod holder positioning. •Three-position 360° swivel base can be top or side mounted, and is keyed to prevent accidental removal. •Durable fiberglass reinforced nylon construction is built for a lifetime of use. •A two hole tether feature keeps a dropped reel holder in the boat. |
|
|
|
|
 |
DUAL ROD HOLDER/FRONT MOUNT By JOHNSON OUTDOOR
Front-mount rod holder fits all 1-5/16" diameter Cannon booms, including telescopic booms. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracket. |
|
|
 |
DUAL ROD HOLDER/REAR MOUNT By JOHNSON OUTDOOR
Designed for fishing two rods off the same downrigger. The post fits into the standard tube clamp that comes with most Cannon downriggers. The angle of each holder can be adjusted separately. All parts are made of lightweight, corrosion-resistant materials. |
|
|
  |
304 STAINLESS FLUSH MOUNT ROD HOLDER By C.E.SMITH CO.INC.
•UV resistant black PVC cap and liner. •Formed mirror polished 304 stainless steel. •Mounting flange 3-3/8" wide x 4-1/2" long. •30 degree x 9" deep rod holder tube 1-9/16" ID. •1/4" stainless gimbal pin. •Hold freshwater or light duty saltwater Rods. •Mounting hardware not included. |
|
|
|
|
|
|
  |
TRIPLE ROD HOLDER By DETMAR CORP
Foam insert holds up to three rods securely without damage. Framework is molded of high strength black plastic. Measures 7-3/4" L x 2-1/4"W x 21-3/16" H. Stainless steel mounting fasteners included. Sold per pair. |
|
|
|
|
  |
MR. CRAPPIE ROD HOLDER SYSTEM By TEMPRESS PRODUCTS LLC
•No tools required for setup or adjustment. •Fully adjustable both horizontally and vertically. •22 molded in lure holders, plus two inset trays for keeping tackle ready. •Fish up to four rods 15" above deck and spaced 8" apart with the Mr. Crappie Gang Mount. •Works with all Fish-On! mounting systems. •Rugged, heavy-duty plastic will not corrode or rust. |
|
|
 |
NEW DESIGN ‘FISH-ON!® ROD HOLDER By TEMPRESS PRODUCTS LLC
This model is compatible with all Fish-On! Accessory mounting options, and like our other rod holders, a Side Mount accessory is included. Molded from commercial grade polymers for years of trouble-free use. Packed in a sealed clamshell with four-color graphics. •Double reel seat •Quick-twist lock ring •Ergonomic adjustment knob •Front notch for spinning reels •Adjustment from vertical to minus 10 degrees •Accommodates spinning reels, baitcast and spin-cast reels •Larger opening for larger diameter rod butts |
|
|
|
|
|
ROD HOLDER EXTENSION By TEMPRESS PRODUCTS LLC
•Raises rod holder 6" •Durable, high impact glass filled nylon material •Easy placement and removal •Uses same twist and lock motion like other Fish-On! Products •Works with all Fish-On! Mounting systems and accessories |
|
|
|
|
 |
STAINLESS TRIPLE ROD HOLDER By TEMPRESS PRODUCTS LLC
A slightly larger rod holder with all the same features as our Double Rod organizer. The Tournament Series Triple Rod Holder is fabricated from polished 304 stainless with injection molded ABS inserts to protect your valuable gear. Stainless mounting hardware included. Packed in clear clamshell with four color graphics and mounting instructions. Size: 13.5"L x 9.5"W x 3"D. |
|
|
  |
FISHING ROD HOLDERS By MOELLER MFG CO INC
Holds rod tip and handle in the roughest conditions. Mount in boat or home utility closet. Mounts vertically or horizontally. Consists of 4-7" aluminum tracks and 8 rubber holders, enough to hold 4 rods. Rubber holders adjustable after mounting. |
|
|
  |
1205 FISHING ROD HOLDER By PERKO
Flush mount. Chrome plated zinc flange, anodized aluminum tube, with soft black flange gasket and integral flip-up cap. Tube is 1-5/8" I.D., 2" O.D., 8" long under flange. Flange is 4 1/4" x 3 1/2". Uses 1/4" bolts. One per display package. |
|
|
|
|
  |
R-A-M® ROD 2000 By NATIONAL PRODUCTS IN
•Fits level wind and spinning reels; fits all rods up to 1-1/2" diameter. Constructed of high strength U.S. made glass reinforced nylon. •With the R-A-M Rod 2000 you simply push down on the butt of the rod and slide it out! Its so simple and fast that the only ones that don't want to be hooked on R-A-M are the fish. •R-A-M Rod 2000's over center bail latch is more reliable and faster than any other type of securing device! •Open side rod holder design for fast removal! There is no faster design available. That means more fish in the boat! •R-A-M Rod 2000 Deck, Flush, Track and Rail Mounting Bases are compatible with: Attwood, Fish-On!, Robert's, Scotty, Bert and Tite-Lok Systems. •No need to drill new holes, simply drop the rod holder in the existing base, or remove their base and install the R-A-M Rod 2000 system. •Lifetime Warranty! |
|
|
|
|
  |
ROD SAVER “ORIGINALS“ By ROD SAVER
The Original Rod Saver is designed to mount rod and reel combo to the deck of the boat. It prevents rod and reel from bouncing out of the boat while traveling down the lake and comes in three popular sizes. |
|
|
 |
ROD SAVER “ORIGINALS“ By ROD SAVER
The Original Rod Saver is designed to mount rod and reel combo to the deck of the boat. It prevents rod and reel from bouncing out of the boat while traveling down the lake and comes in three popular sizes. |
|
|
 |
ROD SAVER HOLDER SIDE MOUNT By ROD SAVER
Our Vertical Mount Rod Savers are constructed with EPDM rubber inserts to hold rods in a boat in a vertical application securing the rods horizontally. The EPDM Rubber is a very outdoor durable material that will resist UV rays and outdoor elements. They are designed to hold rod & reels in a crisscross manner to enable more rods to be stored in a smaller space. |
|
|
|
|
|
|
  |
ROD HANGER SET By TACO METALS INC
Stainless steel spring design securely locks rods in position and hidden installation screws make this innovative rod hanger the most attractive. Delrin insert offers a smooth, protective surface. Accepts rod butts up to 1-1/2" diameter. •Versatile mounting options - horizontal, vertical and overhead •Safe and secure storage for rods and reels •Polished marine grade 316 stainless steel |
|
|
  |
ROD STORAGE HOLDER By T-H MARINE
These Rod Holders mount horizontally or vertically. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely. Great for boats, R.V.'s or garages. Skin pack pairs. |
|
|
 |
ROD TAMER™ ROD STRAPS By T-H MARINE
ROD TAMER™ straps are the best design and highest quality of any rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch and remain unaffected by sunlight and most chemicals. Unlike the old hook-and-loop straps, they will not get hung up in fish hooks, they will not lose their hold when wet, and they will not fade out. The strap end mounts to the deck with one counter-sunk screw. 12" deck mount, holds up to 4 rods. Skin pack. |
|
|
|
|
|
|
  |
5605 BIG “C“ MOUNT By TITE-LOK
Attaches to any edge up to 2-1/4" thick. Convenient way to mount an accessory without drilling any holes. Mounting holes are on the top and end. All accessories are removable. |
|
|
|
|
 |
5610 ROD HOLDER SERIES By TITE-LOK
Tite-Lok's unique open style rod holder rotates to 12 locking positions and tilts to desired fishing rod angle. This design permits fast rod removal when needed, and is ideal for both heavy and light duty fishing. Sold as a 5610 Rod Holder only. |
|
|
 |
5620 SURE-SET ROD HOLDER SERIES By TITE-LOK
The 5620 series tube type rod holder hinges back for quick follow through when setting the hook. The tube measures 10-1/2" deep and will accept standard rod handles. Like all other Tite-Lok rod holders, the 5620 utilizes the Pin-Lok System. The mounting screw and allen wrench are included. |
|
|
 |
5710 MULTI-LOK ROD HOLDER SERIES By TITE-LOK
The 5620 series tube type rod holder adjusts and locks into a full range of positions from vertical to horizontal. The tube measures 10-1/2" deep and will accept standard rod handles. Ideal for planning board, outrigger and downrigger fishing. Mounting screw and allen wrench are included. |
|
|
|
|
