|
|
|
|
   |
FENDER ADJUSTER By BOATERS SPORTS, INC
Makes placing fenders easy. Eliminates tying/untying fender lines. Instant self locking action works automatically to raise and lower the fender and hold it securely in place. Snaps around rails. Accommodates up to 1/2" (1.27cm) diameter line. |
|
|
 |
FENDER LINES/WHIPS By BOATERS SPORTS, INC
These 5' long, 3/8" solid braid, multi-filament polypropylene fender whips will not fade or kink, and are mildew and rot resistant. Pre-spliced and professionally finished, these fender whips are made to last. Secure your fender without hard-to-untie knots. Color matched to our MFP Floating Dock lines. SOLD PER EACH. |
|
|
  |
FENDER TENDER II By DAVIS INSTRUMENTS
Designed to easily attach and adjust, the Fender Tender II will allow the boat owner to attach his fenders in a matter of seconds without having to tie a knot or use screws to attach a holder permanently. 1/4" to 3/8" line. Made of tough, sun-resistant plastic. |
|
|
|
|
  |
KWIK ADJUST FENDER LOK™ By DOCK EDGE
Ratcheted strap allow quick, easy attaching. Squeeze tabs to release. One finger height adjuster for adjustment from 4"-24". One piece per blister pack. |
|
|
|
|
  |
EEZ-IN® FENDER HEIGHT ADJUSTER By GARELICK MFG CO
•Raises or lowers boat fenders with ease! •Automatically locks in place at desired height •Eliminates tying and untying fender lines •Simple locking lever lets line slide down and lock in place •Handles: Hollow braid lines up to 1/2" (1cm) diameter; Solid braid lines up to 3/8" (1cm) diameter •U.S. Patent #344671 |
|
|
  |
NO-SLIP™ FENDER STRAPS By KWIK TEK
No more tying and untying knots! Attach boat fenders to rails and cleats quickly and securely with these fender straps. The NO-SLIP™ pads sewn to the underside of the straps minimize sliding along rails. Easily adjust the length in seconds from 6 in. to 40 in. to fit most boats and docking situations. Color: White. 2 per package. |
|
|
  |
1299 FENDER LOCK By PERKO
Chrome plated zinc. The eye is to be permanently attached to the fender line. 3/8" eye I.D., 1 1/2" O.D. flange. Uses #8 screws. Two per display card. |
|
|
|
|
  |
BIG B™ FENDER HANGER By TAYLOR
Designed for use on Taylor Made fenders with 3/4" I.D. tubing. Maybe used on other brands; but due to variation among brands the consumer must verify a tight enough fit between the tube and product for proper function (Center tube must be small enough to keep the product halves firmly together). •Injection molded reinforced nylon for strength. •Vented to prevent water accumulating •Professional "finished" look •Fits 3/8" diameter rope. |
|
|
|
|
 |
PONTOON RAIL FENDER ADJUSTER 36PC DISPLAY By TAYLOR
Finally, a fender adjuster designed specifically for the 1" square tube rails of Pontoon Boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Constructed from durable ABS plastic, this fender adjuster allows for simple height adjustment for lines up to 3/8". |
|
|
 |
RAIL FENDER HANGER By TAYLOR
Makes is easy to adjust fender heights and locks in place with a jam cleat. Fits up to 1" rails, for 1/4" to 1/2" line. |
|
|
|
|
|
|
 |
TWO FENDER HOLDER By TAYLOR
Shipshape is the word for these lustrous stainless steel Taylor-Made fender holders. Not only are they rakish looking, they're also mighty convenient for fender stowage. For fenders from 7" to 11" diameter. Taylor Made fender holders are simple to install and can be adjusted to conform to the rake of any rail stanchion. |
|
|
  |
QWIK-TIE® ADJUSTABLE FENDER STRAPS By TEK-NAUTICAL
Qwik-Tie® fender straps put an end to tying knots and roaming fenders. They connect quickly to both fender and rail and are non-abrasive, weather resistant, buoyant and machine washable. The slip know feature lets you secure a fender to a railing or cleat in seconds. The gripping feature keeps the strap from sliding on the rail. A special buckle allows for instant adjustment. For boats with handrails 3/4" through 4" in diameter and a distance (handrail to waterline) of 24" to 60". 1" webbing x 48" adjustment length. |
|
|
 |
WING CLEAT By TEK-NAUTICAL
1/4" PVC with nylon webbing. Adjustable fender hanger with one hand operation for mid-size boats. 3 ft. adjustment. 17'-27' boats. |
|
|
|
|
|
|
|
|
  |
FENDER HOOK By WHITECAP INDUST INC
C.P. Brass construction. Improved fender hook with snap action prevents rope from slipping out. Prevents loss of fender. 1 3/16" x 1 9/16". |
|
|
